Specifications

3-16 Command Set
3. 8. Read Synchronized Data
@Description
After a synchronized sampling command #** was issued, you can read
the sampled value that was stored in the register of the module at
specified address.
@Syntax
$(Addr)4<CR>
$ Command leading code.
(Addr) Address ID
4 Read synchronized data.
@Response
>(Addr)(Status)(Data)<CR>
or
?(Addr)<CR>
>
Command is valid.
? Command is invalid or no synchronized sampling
command was issued.
(Addr) Address ID.
(Status) 0 : Data has been sent at least once before.
1 : Data has been sent for the first time since a
synchronized sampling command was
issued. (1-character)
(Data) There are four types of Data format, refers to
Chapter 4 for details.
(6011/D, 6012/D, 6014D)