Specifications

3-8 Command Set
Note : When you want to change the checksum or baud rate then
the DEFAULT* pin should be grounded at first.
@Example
User command: %0130500600<CR>
Response: !30<CR>
Item Meaning Description
% (Leading Code) Command leading code.
01 (OldAddr) Original address ID is 01H.
30 (NewAddr) New address ID is 30H
(Hexadecimal).
50 (TypeCode) Counter input mode.
06 (BaudRate) Baud rate is 9600.
00 (CheckSumFlag) 00 means checksum is disable,
and frequency gate is 0.1 second.
<CR> Carriage return 0x0D.
Code Baudrate
03 1200 bps
04 2400 bps
05 4800 bps
06 9600 bps
07 19200 bps
08 38400 bps
Table -1 Baud rate setting code