Specifications

3-8 Command Set
3. 4. Read Configuration
@Description
Read the configuration of module on a specified address ID.
@Syntax
$(Addr)2<CR>
$
Command leading code
(Addr)
Address ID.
2
Command code for reading configuration
@Response
!(Addr)(TypeCode)(BaudRate)(CheckSumFalg)<CR>
or
?(Addr)<CR>
!
Command is valid.
?
Command is invalid.
(Addr)
Address ID.
(TypeCode)
It always be 40 (Hex) for digital I/O modules.
(BaudRate)
Current setting of communication baud rate,
refer to Table 3-1 for details.
(CheckSumFlag)
Current setting of check-sum flag, refer to
Table 3-3. for details.
(6050, 6052, 6053, 6054,
6056, 6058, 6060, 6063)