Specifications

Introduction 1-1
1. Introduction
1. 1. About the NuDAM DIO Modules
The NuDAM provides a series of digital input or output (DIO) modules
to sense the digital signal or to control the remote devices.
The specified features of each module are shown here.
• NuDAM-6050 : Digital I/O module
• NuDAM-6052 : Isolated digital input module
• NuDAM-6053 : 16-channel digital input module
• NuDAM-6054 : 15-channel isolated digital input module
• NuDAM-6056 : 15-channel isolated digital output module
• NuDAM-6058 : 28 programmable digital I/O module
• NuDAM-6060 : relay output and isolated digital input module
• NuDAM-6063 : 8-channel relay output module
1. 2. Overview of NuDAM-6050
What is NuDAM-6050 ?
NuDAM-6050 is a digital input and output module. The digital input
channels can monitor active TTL signals, and sense passive switch
on/off signal because of the internal pull high resistors. The convenient
open collector output channels can sink up to 50 mA current.
Combining with the relay devices, it is possible to control the high
power devices by programming output channel of the NuDAM-6050.
Features of NuDAM-6050
• 7 bits digital input
• 8 bits open collector digital output
• Programmable host watchdog timer for host failure protection
• Internal watchdog timer for device failure protection
• Easy programming by software
• Easy installation and wiring
Specifications of NuDAM-6050