Specifications

2-1 Initialization & Installation
2. Initialization & Installation
2. 1. Software Installation
1. If you have already installed “NuDAM Administration” then skip
other steps.
2. Backup your software diskette.
3. Insert “NuDAM Administration” diskette into floppy drive A:
4. Change drive to A:
5. Installation command syntax
INSTALL drive:
drive name is C to Z.
Example 1 : install to drive C:
A:\> INSTALL C:
Example 2 : install to drive F:
A:\> INSTALL F:
6. NuDAM Administration Utility will be installed in the directory
C:\NUDAM
2. 2. Initializing a Brand-New Module
Objective of Initializing a Brand-New NuDAM
All NuDAM modules, except NuDAM-6520 and NuDAM-6510, in a
RS-485 network must have an unique address ID. Every brand-
new NuDAM has a factory default setting as following:
• Address ID is 01.
• Baud rate is 9600 bps
• Check-sum disable
• Host Watchdog timer is disable