User`s guide

52 • ATI 3D RagePro XL Features
5
ATI 3D RagePro XL Features
5.1 General Features
The Rage Pro XL graphics controller is ATI first to support Desktop Digital
Flat Panel Monitors. Listed below are the VGA&LCD enhanced features of
NUPRO-710:
l High integration results in a low cost, small footprint graphics
subsystem ideal.
l Comprehensive AGP support, including 2X mode, Sideband
Addressing and AGP Texturing .
l PCI version 2.1 with full bus mastering and scatter / gather support.
l Fully PC 98 compliant.
l Bi-endian support for compliance on a variety of processor platforms.
l Fast response to host commands:
l Programmable flat or paged memory model with linear frame buffer
access
l Triple 8 -bit palette DAC with gamma correction for true WYSIWYG color.
Pixel rates up to 230MHz.
l Supports 2MB to 8MB SGRAM at up to 125MHz providing bandwidths of
up to 1Gbyte/sec across a 64-bit interface. Memory upgrade via
industry standard SO-DIMM, for reduced board area and higher
memory speeds.
l Supports 8MB SDRAM at up to 150MHz across 64-bit interface.
l DDC1/2B+ for plug and play Monitor Supported
l Power management for full VESA DPMS and EPA Energy Star
compliance.
l Integrated hardware diagnostic tests performed automatically upon
initialization.