User`s guide

Introduction • 5
Jumpers:
JP1, JP2, JP3, JP4: Bus & External Clock Selector
JP5, JP6, JP7: CPU to Bus Frequency Ratio
JP9: RTC Clear CMOS Memory
JP8, JP10/JP11: Watchdog Timer Setting
JP12, JP13, JP14:
Set DiskOnChip will be mapped to Memory base
address
Connectors:
Fan Connector: Connector for CPU cooler & chassis fan
IRCON Connector:
Connector for Optional IrDA-Compliant Infrared
Port module
LCD Connector: 28 pins Connector for LCD
USB Connector: Connector for USB port
ATX Connector: Connect to backplane ATX connector
PS-ON: Two pin for Case power switch
Reset Switch
Connector:
Two pin Connector for a Reset Switch
IDE_LED: Two pin Connector for an IDE Activity LED
Speaker Connector: 4 pins Connector for a System Case Speaker
Key Lock Connector: Connector for a Keyboard Lock
Power LED Connector: Connector for a Power-On Indicator LED
SMI Switch Connector: Connector for a Suspend Switch lead
SMI LED Connector: Connector for a Suspend Switch lead
Primary, Secondary
IDE Connector:
Two 40-pin Block
Parallel Printer
Connector:
26-pin Block
Floppy Drive
Connector:
34-pin Block
COM2 Connector: 10-pin Block
COM1 Connector: 9-pin Female
PS/2 Mouse
Connector:
6-pin Female
PS/2 KB Connector: 6-pin Female
VGA Connector: (Only
for NUPRO-710)
15-pin Female
RT1: 2-pins, hardware monitor connector