User`s manual

Device Manager 21
DAQMaster
Sub-functions
Analog Output
When using the test panel for ADLINK DAQ-2000 Series and 6000
Series modules, click on the AO tab sheet to adjust the following
parameters:
X Mode: Select DC Output or Function Generator
X AO Channel: Select the channel for analog output
X Function: Select the output function such as Sine, Square,
Triangle, or Sawtooth Wave
X Offset: Set the function offset
X Frequency: Set the function frequency
X Amplitude: Set the function amplitude
X Phase: Set the phase value
X Duty Cycle: Set the duty cycle
For advanced operations, DAQMaster provides a basic function
generator that you may use to set the offset, frequency, amplitude,
phase, and duty cycle.
Click on Start to test the operation or click Stop to abort.