User`s manual

20 Device Manager
DAQMaster
Sub-functions
Test Panel
The DAQMaster integrates a basic test function to analyze test
and measurement tasks and operations supported by the installed
module. To access, click on the test panel button from the sub-
function panel. The test panel interface changes according to the
selected module and its supported operation. Refer to the follow-
ing sections.
Analog Input
When launching the test panel for ADLINK DAQ-2000 Series and
9000 Series modules, click on the AI tab sheet to adjust the follow-
ing parameters:
X Mode: Select continuous or polling mode
X AI Channel: Select the AI channel
X Reference Ground: Select the reference ground
X AI Range: Select the AI range
X Sample Rate: Set the AI sampling rate
Click on Start to test the operation or click Stop to abort.