User`s manual

Installation 5
DAQMaster
Checking the DAQ Card Drivers
2.4 Checking the DAQ Card Drivers
To check if the DAQ card(s) is properly installed and detected by
the system:
1. Launch the Windows Device Manager.
2. Expand the NuDAQ Boards item, then double-click on
the listed DAQ device(s).
3. Click the Resources tab and check if the device I/O port
and IRQ resources are allocated correctly.
NOTE The necessary DASK libraries are installed during the
DAQMaster installation. These libraries hold the PCIS-
DASK, D2K-DASK, and WD-DASK system files. For
more information on these DASK libraries, install the cor-
responding software packages.
2.5 Launching the DAQMaster
To launch DAQMaster from the Windows Start menu, click Start >
ADLINK > DAQMaster. The main window appears.