User`s guide

Configuration and Diagnostic • 21
From the menu bar:
In Configuration view, select Add Items from the Device menu to bring up
the Add Items dialog box.
1. In the Add Items dialog box, you will see all the valid items in this
device. You can click on the item name column to modify the
item name, and right click on the range/port/mode column of the
item to change the property(if this property is writeable). You can
select the items you want to add, and click the Add button, or
click Add All button to add all items.
2. The new item appears in the Tree Browser and the List View.
4.1.5 Modifying an Existing Item
From the Tree Browser and List View:
In Configuration view, click the right button on the item you want to modify
then select the Edit Item in the popup menu. The Edit Item dialog box will
appear.
From the menu bar:
In Configuration view, select Edit Item from the Device menu to bring up
the Edit Item dialog box.
1. You can modify the properties of this item , then click the OK
button.
2. The item updates automatically in the Tree Browser and the List
View.
4.1.6 Saving Configuration
You can save the configuration into a file. The default file name extension
is CFG.
From the menu bar:
Select the Save or Save As… command from the File menu.
4.1.7 Loading Configuration File
You can load the existing configuration file.
From the menu bar:
Select Open… from the File menu.
Note: The NuDAQ PCI card OPC server automatically loads
configuration file NuDAQ.cfg (if the file exists) when starting.