User`s guide

8 • Installation
Then you can select Exit! command in the menu bar or Done button to
exit the driver registry utility. To make the registered drivers work, you
have to restart Windows NT system.
After re-entering Windows NT and the NuDAQ PCI devices you wish to
operate have been plugged in your computer, make sure the device
drivers corresponding to those NuDAQ PCI cards are already started. For
NuDAQ PCI card OPC server to be able to communicate with NuDAQ PCI
card, device driver AdlDask as well as the card’s own device driver (e.g.
PCI6208, PCI7200, PCI7230, PCI7234, PCI7248, PCI7250, PCI7252,
PCI7296, PCI7432, PCI7433, PCI7434, PCI8554, PCI9111, PCI9112,
PCI9113, PCI9114, or PCI9118, etc.) must be started. You can open the
Control Panel, double-click Devices, and a Devices window will be shown
as below.
If the device status is none, you have to select the AdlDask and the device
from the device list and then press the Start button.