User`s guide

Software Utility • 97
Figure 22. A/D with Polling Test Window
7.2 I_EEPROM
This file is used to enable or disable the interrupt of the PCI-9111 board. This
software is a text-driven program. By default, the interrupt on the PCI-9111
board is “on”; users wishing not to use the interrupt function can use this utility
to turn off the interrupt of the PCI-9111 board.
After finishing the DOS installation, you can execute the utility by typing the
following command:
C> cd \ADLINK\DOS\9111\UTIL
C> I_eeprom
The program will prompt for an input of the card type – enter 9111. After
specifying the card type, the program displays a set of instructions to guide you
through to enable or disable the interrupt of the PCI-9111 board.