User`s guide

•

PCIS-DASK Overview

- Dual-Interrupt System Setting function

4.1 General Configuration Function Group

Use these functions to initializes and configures data acquisition card.

Register_Card Initializes the hardware and software

states of an NuDAQ PCI-bus data

acquisition card. Register_Card must be

called before any other DASK library

functions can be called for that card.

Release_Card Tells DASK library that this registered card

is not used currently and can be released.

This would make room for new card to

4.2 Actual Sampling Rate Function Group

GetActualRate Returns the actual sampling rate the

device will perform for the defined

sampling rate value.

4.3 Analog Input Function Group

4.3.1 Analog Input Configuration Functions

AI_9111_Config Informs PCIS-DASK library of the

trigger source and trigger mode

selected for the analog input operation

of PCI9111. You must call this function

before calling function to perform

continuous analog input operation of

PCI9111.

AI_9112_Config Informs PCIS-DASK library of the

trigger source selected for the analog

input operation of PCI9112. You must

call this function before calling function