User`s guide

ACLD-9188 • 29
5.3 Signal Conditioning Circuits
The signal conditioning circuits of ACLD-9188 is the same as the circuits
on ACLD-8125. Please refer to Section 4.3 for details.
You can connect the card and this terminal board with a DB-37 cable. The
CN3 and CN1 are connected together, and so are the CN2 and CN4. If
your application is sensitive signal, we suggest that please do not use flat
cable connector and screw connector at the same time.
5.4 Pin Assignment
A1 to A20 is CN1.
B1 to B20 is CN2.
For example, the first field of the table means that A1(CN3-1), CN1-1,
CN5-1 are connected together.
A1 CN1-1 CN5-1 B1 CN2-1 CN5-11
A2 CN1-2 CN5-20 B2 CN2-2 CN5-30
A3 CN1-3 CN5-2 B3 CN2-3 CN5-12
A4 CN1-4 CN5-21 B4 CN2-4 CN5-31
A5 CN1-5 CN5-3 B5 CN2-5 CN5-13
A6 CN1-6 CN5-22 B6 CN2-6 CN5-32
A7 CN1-7 CN5-4 B7 CN2-7 CN5-14
A8 CN1-8 CN5-23 B8 CN2-8 CN5-33
A9 CN1-9 CN5-5 B9 CN2-9 CN5-15
A10 CN1-10 CN5-24 B10 CN2-10 CN5-34
A11 CN1-11 CN5-6 B11 CN2-11 CN5-16
A12 CN1-12 CN5-25 B12 CN2-12 CN5-35
A13 CN1-13 CN5-7 B13 CN2-13 CN5-17
A14 CN1-14 CN5-26 B14 CN2-14 CN5-36
A15 CN1-15 CN5-8 B15 CN2-15 CN5-18
A16 CN1-16 CN5-27 B16 CN2-16 CN5-37
A17 CN1-17 CN5-9 B17 CN2-17 CN5-19
A18 CN1-18 CN5-28 B18 CN2-18 -
A19 CN1-19 CN5-10 B19 CN2-19 -
A20 CN1-20 CN5-29 B20 CN2-20 -