User`s guide
Intouch Sample Programs
•
49
Please refer to chapter 2 for the detailed descriptions about the PCIS-DDE
Server configuration.
A configuration file “NuDAQ.cfg”, located in Samples directory, is provided.
This configuration file defines all the topic names required for executing our
sample programs. To use this configuration file, set the configuration file
path as the directory where this configuration file is located (the default is
“C:\ADLink\Pcisdde\Samples”), and then re-execute PCIS-DDE server
program.
This configuration file will be used while PCIS-DDE Server program is
re-executed. For the configured topics fitting your system, use
“/Configure/Topic Definition” command to modify the contents of the topics
(e. module address, data range, … etc.). Please refer to section 2.2.2 for
the detailed descriptions about topic definition.
Step 3. Start the InTouch program (INTOUCH.EXE) and select the InTouch
sample program you want to execute in the list in the InTouch Application
Manager dialog box. If the sample programs are not shown in the list, on
the Tools menu, click Find Applications. The Starting directory for
search dialog box appears and locates the directory in which you want to
search for applications, and then click OK. The InTouch Application
Manager will reappear displaying icons for all the applications that were
found in the selected directory.
Please refer to InTouch User’s Guide or related reference books to get the
information about using InTouch.