User`s guide

44
DDE Item Names In PCIS-DDE
* “PASBIn” and “PBIn” (n is the bit number) commands are both used for
n-th bit digital data in. For signal bit digital data input, the performance of
these two commands is almost the same. However, for multi-bits digital
data input, using “PASBIn” can get much higher performance than “PBIn”.
Hence “PASBIn” command is especially suitable for multi-bits digital data
input.
4.13 PCI-6208V/18V/08A
Configuration and Analog Output Command Set
Command Item Name
Requested/Poked
value
R/W Data Type
Voltage to Current
Mode Setting for
PCI-6208A
PCP
Data range: 0 ~ 2,
Where
0: 0 ~ 20 mA
1: 5 ~ 25 mA
2: 4 ~ 20 mA
W Integer
Analog Data Out
For PCI-6208V
/08A:
PAO0 ~ PAO7
For PCI-6216V:
PAO0 ~ PAO15
For PCI-6208V/16V:
Data range:
-32768 ~ 32767
example: 2048
For PCI-6208A:
Data range:
0 ~ 32767
example: 2048
W Integer
Digital Data In PDI
Data Range: 0 ~ 15
Example: 10
R Integer
Digital Data Out PDO
Data Range: 0 ~ 15
Example: 10
W Integer
Nth bit Digital Data
In (N is the bit
number
PBI0…PBI3
Data: 0 or 1 R Integer
Fast Nth bit Digital
Data In (N is the bit
number)
PASBI0…
PASBI3
Data:0 or 1 R Integer
* “PASBIn” and “PBIn” (n is the bit number) commands are both used for
n-th bit digital data in. For signal bit digital data input, the performance of
these two commands is almost the same. However, for multi-bits digital
data input, using “PASBIn” can get much higher performance than “PBIn”.
Hence “PASBIn” command is especially suitable for multi-bits digital data
input.