User`s guide

Getting Started

•

Since each DI/O port of PCI-7248/96 can be set as input port or output

port, this button is used to configure the port direction (Input port or output

port) of PCI-7248/7296 boards. To perform PCI-7248/96 DI/O port

configuration, push this button and the dialog box is shown as the

following figure:

In this window, you can set each port as an input port or an output port by

selecting the port direction from the combo box that is beside each port

name. CN1 and CN2 sections are available for both PCI-7248 and

PCI-7296. However, CN3 and CN4 sections are only available for

PCI-7296.

2.2.3 /Configure/DDE Server Settings

A number of parameters that controls the internal operation of the Server

can be set. In most cases, the default settings for these parameters provide

good performance and do not require changing. However, they can be

changed to fine-tune the Server for a specific environment. To configure

the PCIS-DDE server, select DDE Server Settings from Configuration

Menu in NuDAQ main window. The "DDE Server Settings " dialog box is as

follows: