User`s guide

Getting Started • 13
Reply Timeout:This field is used to input the amount of time (in seconds)
the NuDAQ boards on the system will be given to reply to
commands from the PCIS-DDE Server. The Timeout
message is sent out when a NuDAQ board fails to
respond. The value is valid from 1 to 32 and the default
value is 3 seconds.
2.2.2 /Configure/Topic Definition
To define the Topics, select Topic Definition from Configuration Menu in
NuDAQ main window. The topic definition operation is not valid until at
least one board is defined. The "Topic Definition" dialog box is as follows:
The fields and buttons in Topic Definition dialog box are described in the
following:
Push this button to close the dialog box.
Define a new topic and the NuDAQ Topic Definition dialog
box displays as the figure below.
This button appears only as at least one topic is defined. Push
this button to modify the settings for the selected topic.
This button appears only as at least one topic is defined. Push
this button to delete the selected topic.