User`s guide

12 • Getting Started
Push this button to close the dialog box.
Define a new board and the “NuDAQ Adapter Card Setting”
dialog box displays as the figure below.
This button appears only as at least one board has been
defined. Push this button to modify the settings for the
selected board.
This button appears only as at least one board is defined. Push
this button to delete the selected board.
The following section shows the NuDAQ Adapter Card Setting dialog box
and gives the detailed description of each field:
Board Type:Select the board type for this configuration.
Board Number:Select the board sequence number. The board sequence
number represents the sequence number of the cards
with the same card type or card series plugged in the PCI
slots (The relationship between card types and card
series is listed in the description of Board Type field). The
card sequence number setting is according to the PCI slot
sequence in the mainboard. For example, if there are two
PCI-7200 cards and one PCI-9112 card plugged on your
PC, the Board number of the PCI-7200 board in the prior
slot should be set as 0, and the Board number of the other
PCI-7200 will be 1. The Board number of the PCI-9112
card has to be set as 0.