User`s guide

10 • Getting Started
Using this utility to install a new driver, please refer to section 2.1.1.
Using PciUtil to change the buffer allocated settings of one of the
NuDAQ PCI-bus cards’ device drivers, select the driver from the
Registered Driver list and click “Modify…” button and then a “Driver
Configuration” window is shown as below.
Inside the allocated buffer size fields of AI, AO, DI and DO are the originally
set values. Type the value in the box corresponding to AI, AO, DI, or DO
according to the requirement of your applications, and then click “OK”
button.
To remove a registered driver, select the driver from the Registered Driver
list in The PciUtil main window and click “Remove” button. The selected
driver will be deleted from the registry table.