User`s guide

8 • Getting Started
File/Sub-directory Description
PciDDE.exe NuDAQ PCI-base card 32-bit DDE
Server Program
PciDDE.hlp NuDAQ PCI-base card 32-
bit DDE Server Help
File
PciDDE.cnt NuDAQ PCI-base card 32-
bit DDE Server Help
Contents File
Wwdlg32.dll Required DLL file for running PCIS-
DDE server
program
Pdde.dll Required DLL file for running PCIS-
DDE server
program
PciDDE.pdf PCIS-DDE User’s Manual
Samples <DIR> InTouch Sample programs
Samples\NuDAQ.cfg Configuration file for running sample programs
Util <DIR> Driver Registry utility
After finishing the installation and re-entering Windows NT, make sure the
device drivers of NuDAQ cards are already started. For PCIS-DDE to be
able to communicate with NuDAQ PCI-bus card, device driver AdlDask as
well as the card’s own device driver (e.g. PCI7200, PCI7230,
PCI-7234.SYS, PCI7250, PCI7248, PCI7296, PCI7432, PCI7433,
PCI7434, PCI9111, PCI9112, PCI9113, PCI-9114, PCI9118, PCI6208 or
cPCI7252) must be started. You can open the “Control Panel”, double-click
“Devices”, and a Devices window will be shown as below.