User`s guide

PCIS-LVIEW/95 Overview ? 21
9113 AD INT Status
Check the status of EOC interrupt analog input
operation
9113 AD INT Stop
Stop the EOC interrupt analog input operation
9113 AD Set Channel
Set A/D channel
9113 AD Set Mode
Set A/D trigger mode
9113 AD Set Range
Set A/D range
9113 Counter Read
Read the count value of the counter#0
9113 Counter Start
Program the counter #0.
9113 Counter Stop
Stop the timer/counter operation of the counter
#0
9113 FIFO Interrupt Cont
AD
Performs A/D conversion N times with FFHF
interrupt data transfer by using pacer trigger
9113 Interrupt Cont AD
Performs A/D conversion N times with EOC
interrupt data transfer by using pacer trigger
9113 Reset FIFO
Reset A/D FIFO
5.21 9114 VIs
9114 Initial
Initialize PCI-9114 card
9114 AD Acquire
Trigger the A/D conversion data for PCI-
9114 by
software trigger. Then read the 16-bit A/D data
when the data is ready.
9114 AD Acquire MUX
Trigger the A/D conversion data for PCI-
9114 by
software trigger. Then read the 32-bit A/D data
when the data is ready
9114 AD FFHF INT
Restart
Restart the FIFO half full interrupt transfer
without re-initial all the relative registers
9114 AD FFHF INT Start
Initialize and start up the interrupt transfer with
AD FIFO Half-Full Interrupt transfer mode by
using internal pacer trigger
9114 AD FFHF INT
Status
Check the status of FIFO half-
full interrupt analog
input operation
9114 AD FFHF INT Stop
Stop the FFHF interrupt data transfer function
9114 AD INT Start
Initialize and start up the interrupt transfer with
End-of-conversion (EOC) Interrupt transfer
mode by using internal pacer trigger
9114 AD INT Status
Check the status of EOC interrupt analog input
operation
9114 AD INT Stop
Stop the EOC interrupt data transfer function
9114 AD Set Channel
Set A/D channel
9114 AD Set Mode
Set A/D trigger and channel scan mode
9114 AD Set Range
Set A/D range
9114 Counter Read
Read the count value of the counter#0
9114 Counter Start
Program the counter #0
9114 Counter Stop
Stop the timer/counter operation of the counter
#0
9114 Digital Input Port
Read data from digital input ports
9114 Digital Output Port
Write data to digital output port
9114 FIFO Interrupt
Cont AD
Performs A/D conversion N times with FFHF
interrupt data transfer by using pacer trigger
9114 Interrupt Cont AD
Performs A/D conversion N times with EOC
interrupt data transfer by using pacer trigger
9114 Reset FIFO
Reset A/D FIFO