User`s guide

20 ? PCIS-LVIEW/95 Overview
9112 AD DMA Stop
Stop the DMA analog input operation
9112 AD INT Start
Initializes and starts up A/D conversion with
interrupt data transfer by using the pacer
trigger (internal timer trigger)
9112 AD INT Status
Check the status of interrupt analog input
operation
9112 AD INT Stop
Stop the interrupt analog input operation
9112 AD Set Autoscan
Set automatic hardware channel scan to be
enable or disable
9112 AD Set Channel
Set A/D channel
9112 AD Set Mode
Set the A/D trigger and data transfer mode
9112 AD Set Range
Set the A/D range
9112 Allocate DMA
Memory
Contact Windows 95 system to allocate a block
of contiguous memory for DMA transfer
9112 Analog Output
Write data to D/A converters
9112 DMA Cont AD
Perform A/D conversion N times with DMA data
transfer by using the pacer trigger (internal timer
trigger)
9112 Free DMA Memory
Deallocate a system DMA memory
9112 Get DMA Sample
Retrieve the index-th data in DMA buffer
9112 INT Cont AD
Perform A/D conversion N times with interrupt
data transfer by using the pacer trigger (internal
timer trigger)
9112 Read from Digital
Line
Read data from digital input port
9112 Read from Digital
Port
Read data from digital input port
9112 Timer Read
Read the count value of the Tomer#0
9112 Timer Start
Program the Timer #0
9112 Timer Stop
Stop the timer #0 operation
9112 Write to Digital
Port
Write data to digital output port
5.20 9113 VIs
9113 Initial
Initialize PCI-9113 card
9113 AD Acquire
Trigger the A/D conversion data for PCI-
9113 by
software trigger. Then read the 12-bit A/D data
when the data is ready
9113 AD Acquire MUX
Trigger the A/D conversion data for PCI-
9113 by
software trigger. Then read the 32-bit A/D data
when the data is ready
9113 AD FFHF INT
Restart
Restart the FIFO half-full interrupt transfer
without re-initial all the relative registers.
9113 AD FFHF INT Start
I
nitial and start up the interrupt transfer by using
AD FIFO Half-Full Interrupt transfer mode by
using internal pacer trigger
9113 AD FFHF INT Status
Check the status of FIFO half-full interrupt
analog input operation
9113 AD FFHF INT Stop
Stop the FIFO half-full interrupt analog input
operation
9113 AD INT Start
I
nitial and start up the interrupt transfer by using
End-of-conversion (EOC) Interrupt transfer
mode by using internal pacer trigger