User`s guide

18 ? PCIS-LVIEW/95 Overview
7300 Set Sample
Write the output data to the index-th position in
output DMA buffer
5.13 7396 VIs
7396 Initial
Initialize PCI-7396 card.
7396 Config Port
Configure the input or output of each port.
7396 Digital Input
Read digital input data from digital input port.
7396 Digital Output
Write data to digital output port.
7396 Timer Read
Read the current contents of the counter #0.
7396 Timer Start
Configure the counter #0 to operate in the specified
mode.
7396 Timer Stop
Stop the event counting operation.
5.14 7432 VIs
7432 Initial
Initialize PCI-7432 card.
7432 DI
Read 32-bit digital input data from digital input port.
7432 DO
Write data to digital output ports.
5.15 7433 VIs
7433 Initial
Initialize PCI-7433 card.
7433 DI HiDW
Read high 32-
bit digital input data from digital input
port.
7433 DI LowDW
Read low 32-bit d
igital input data from digital input
port.
5.16 7434 VIs
7434 Initial
Initialize PCI-7434 card.
7434 DO HiDW
Write data to high 32 bits of the 64 isolated digital
outputs.
7434 DO LowDW
Write data to low 32 bits of the 64 isolated digital
outputs.
5.17 8554 VIs
8554 Initial
Initialize PCI-8554 card.
8554 Write Counter
Write command to counter #1 ~ #12 by this function.
8554 Read Counter
Read counter information.
8554 Stop Counter
Stop counter.
8554 Read Status
Read current counter status.
8554 DO
Write a 8-bit data to the digital output port.
8554 DI
Read 8-bit data from digital input port.
8554 SET cntCLK
Select 8254 counter #1 ~ #10 clock source.
8554 SET CK1
Select source of CK1.
8554 SET DBCLK
Select debounce clock.
8554 Software
Reset
Reset PCI-8554 card.