User`s manual
Introduction 5
General Purpose Digital I/O (G. P. DIO)
X Channels: 24 programmable input/output
X Compatibility: TTL/CMOS
X Input voltage:
Z Logic Low: VIL=0.8 V max; IIL=0.2 mA max
Z High: VIH=2.0 V max; IIH=0.02 mA max
X Output voltage:
Z Low: VOL=0.5 V max; IOL=8 mA max
Z High: VOH=2.7 V min; IOH=400 µA
General Purpose Timer/ Counter (GPTC)
X Channels: Two up/down timer/counters
X Resolution: 16-bit
X Compatibility: TTL/CMOS
X Clock source: Internal or external
X Maximum source frequency: 10 MHz
Analog Trigger (A.Trig)
X Source: External analog trigger (EXTATRIG)
X Level: ±10V external
X Resolution: 8-bit
X Slope: Positive or negative (software selectable)
X Hysteresis: Programmable
X Bandwidth: 400 KHz
X External Analog Trigger Input (EXTATRIG)
X Impedance: 40 KΩ
X Coupling: DC
X Protection: Continuous ±35V maximum