User`s guide

Registers Format • 13
The possible gains and their corresponding input ranges are listed in the
following table:
Analog Input Range
Setting by JP1 &
JP2
G2 G1 G0 GAIN Input Range
0 0 0 X 1
±5 V
10V & 0 0 1 X 2
±2.5 V
Bipolar 0 1 0 X 4
±1.25 V
0 1 1 X 8
±0.625 V
1 0 0 X 16
±0.3125 V
0 0 0 X 1 0 ~ +10 V
10V & 0 0 1 X 2 0 ~ +5 V
Uni-polar 0 1 0 X 4 0 ~ +2.5 V
0 1 1 X 8 0 ~ +1.25 V
1 0 0 X 16 0 ~ +0.625 V
0 0 0 X 1
±10 V
20V & 0 0 1 X 2
±5 V
Bipolar 0 1 0 X 4
±2.5 V
0 1 1 X 8
±1.25 V
1 0 0 X 16
±0.625 V
0 0 0 X 1 X
20V & 0 0 1 X 2 0 ~ +10 V
Uni-polar 0 1 0 X 4 0 ~ +5 V
0 1 1 X 8 0 ~ +2.5 V
1 0 0 X 16 0 ~ +1.25 V
Note: Please refer section 2.6 for jumper setting of input range.