User`s guide

Installation • 5

Again inspect the module for damage. Press down on all the socketed IC's to

make sure that they are properly seated. Do this only with the module place

on a firm flat surface.

Note: DO NOT APPLY POWER TO THE CARD IF IT HAS BEEN

DAMAGED.

You are now ready to install your ACL-8113A.

2.3 ACL-8113A's Layout

CN1

VR1 VR2 VR3

VR4

SW1

JP1 JP2

ADS774

8113G 32CH S.E. ISOLATED A/D CARD REV A

+10V

+20V BI