User`s guide

4 • Installation
2
Installation
This chapter describes how to install the ACL-8113A. At first, the contents in
the package and unpacking information that you should be careful are
described. The jumpers and switches setting for the ACL-8113A's base
address and input range selection are also specified.
2.1 What You Have
In addition to this User's Manual, the package includes the following items:
l ACL-8113A 32-CH S.E. Isolated A/D card
l ADLINK CD
If any of these items is missing or damaged, contact the dealer from whom
you purchased the product. Save the shipping materials and carton in case
you want to ship or store the product in the future.
2.2 Unpacking
Your ACL-8113A card contains sensitive electronic components that can be
easily damaged by static electricity.
The card should be done on a grounded anti-static mat. The operator should
be wearing an anti-static wristband, grounded at the same point as the anti-
static mat.
Inspect the card module carton for obvious damage. Shipping and handling
may cause damage to your module. Be sure there are no shipping and
handing damages on the module before processing.
After opening the card module carton, extract the system module and place it
only on a grounded anti-static surface component side up.