User`s manual

Installation 11
2 Installation
This chapter describes the configurations of 723X series. The
723X series is Plug and Play and can easily be installed onto any
PC system with PCI slots.
2.1 What You Have
X This User’s Manual
X 723X family Isolated Digital I/O Card
X ADLINK CD
X Software Installation Guide
If any of these items are missing or damaged, please contact the
dealer from whom the product was purchased. Save the shipping
materials and carton for future storage or shipping purposes.
2.2 Unpacking
Your 723X series card contains sensitive electronic components
that can be easily damaged by static electricity.
The card should be placed on a grounded anti-static mat. The
operator should wear an anti-static wristband, grounded at the
same point as the anti-static mat. Inspect the card module carton
for obvious damage. Shipping and handling may cause damage to
the module. Ensure that there are no shipping and handing dam-
ages on the module before processing.
After opening the card module carton, extract the system module
and place it only on a grounded anti-static surface component side
up.
Again, inspect the module for damage. Press down on all sock-
eted ICs to make sure they are properly seated. Do this only with
the module placed on a firm flat surface.
Note: Do not apply power to the card if it has been damaged.