User`s manual

Getting Started 25
Matrix MXE-5000 Series
User’s Manual
3.3 Connecting DC power
Note: Before connecting DC power to the MXE-5104M
controller, ensure voltage and polarity are compatible
with the DC input. Incompatibility will cause system
damage.
The DC power input connector of the MXE-5104M controller is
located on the rear panel. It has three pins, V+, chassis ground,
and V- from right to left respectively. The DC power input accepts
input voltage as shown previously.
1. Connect the DC power as shown in the Figure
2. Fix the DC connector using the 2 screws
.