User`s manual

Getting Started 33
MI-960
3.3 Driver Installation
The MI-960 drivers are located in the following directories on the
Driver DVD, or can be downloaded from the ADLINK website
(http://www.adlinktech.com):
Follow the instructions below to install the required MI-960 drivers:
1. Install the Windows operating system before installing any
driver. Most standard I/O device drivers are installed during
Windows installation.
2. Install the Chipset driver by running the program
X:\Industrial Motherboard\MI-960\Chipset\infinst_autol.exe.
Follow the instructions given and reboot when instructed.
3. Install the Display driver and utilities by running the program
X:\Industrial Motherboard\MI-960\VGA\Windows XP\winxp
_14331.exe. Follow the instructions given and reboot when
instructed.
4. Install the LAN1 driver (Intel) by running the program
X:\Industrial Motherboard\MI-960\Ethernet\Intel\
Windows XP\PRO2KXP.exe. Follow the instructions given
and reboot if required.
5. Install the LAN2 driver (Marvell) by running the program
X:\Industrial Motherboard\MI-960\Ethernet\Marvel\setup.exe
. Follow the instructions given and reboot if required.
6. Install the Audio driver by running the program
X:\Industrial Motherboard\MI-960\Audio\Windows XP\
WDM_R193.exe. Follow the instructions given and reboot if
required.
Chipset driver X:\Industrial Motherboard\MI-960\Chipset
Display driver X:\Industrial Motherboard\MI-960\VGA\Windows XP
LAN1 (Intel) X:\Industrial Motherboard\MI-960\Ethernet\Intel\Windows XP
LAN2 (Marvell) X:\Industrial Motherboard\MI-960\Ethernet\Marvel\Windows XP
Audio driver X:\Industrial Motherboard\MI-960\Audio\Windows XP