User`s manual

Connectors & Jumpers 15
MI-960
2 Connectors & Jumpers
The connectors and jumpers on the MI-960 allow you to connect
and configure external devices. The following specify the pin
assignments for connectors and jumper on the MI-960. Refer to
Figure 1-2: MI-960 Board Layout and Figure 1-3: MI-960 Rear
I/O Layout for connector and jumper locations.
2.1 Rear I/O Connectors
PS/2 Mouse Port (green)
PS/2 Keyboard Port (purple)
Pin # Signal Function
1MSDATAMouse Data
2 NC not connected
3 GND Ground
4+5V Power
5 CLK Clock
6 NC not connected
Pin # Signal Function
1 KBDATA Keyboard Data
2 NC not connected
3 GND Ground
4+5V Power
5 CLK Clock
6 NC not connected