User`s manual

BIOS Setup 45
MI-110
On Chip IDE Device
IDE HDD Block Mode
If your IDE hard drive supports block mode select Enabled for
automatic detection of the optimal number of block read/writes
per sector the drive can support.
IDE DMA Transfer Access
Use this field to enable or disable IDE DMA transfer access.
OnChip Primary/Seondary PCI IDE
The integrated peripheral controller contains an IDE interface
with support for two IDE channels. Select Enabled to activate
each channel separately.
IDE Primary/Secondary Master/Slave PIO/UDMA Mode
Two IDE devices may have a different Mode timing (0, 1, 2, 3,
4), which need to be independent. The default setting “Auto”
will allow auto detection to ensure optimal performance.
On-Chip SerialATA
Options: Disabled, Auto, Combined Mode, Enhanced Mode,
SATA only