User`s manual

26 Jumpers and Connectors
Note 1: These signals are not connected on the board.
Note 2: These signals are pulled high on the board.
Note 3: These signals are pulled low on the board.
Note 4: The VIO signals by default set to +5V via jumper JP3.
VIO(4) 57 58 AD3 N/C 57 58 EREADY(1)
AD2 59 60 AD1 GND 59 60 RSTOUT#(1)
AD0 61 62 +5V ACK64# 61 62 +3.3V
GND 63 64 REQ64# GND 63 64 Monarch#(1)
Signal
Name
JN1
Pin
Signal
Name
Signal
Name
JN2
Pin
Signal
Name