User`s manual

10 Introduction

Real -Time Clock and Nonvolatile Memory

X Built into Intel® 82801DB southbridge RTC

X Battery-backed memory is used for BIOS configuration

X Separate 3V coin cell CR2032 battery used for RTC and

nonvolatile memory

Environment

X Operating temperature: 0 to 45°C

(1)

Storage temperature: -40 to 80°C

X Humidity: 5% to 95% non-condensed

X Shock: 15G peak-to-peak, 11ms duration, non-operation

X Vibration:

(2)

Non-operation: 1.88Grms, 5-500Hz, each axis

Z Operation: 0.5Grms, 5-500Hz, each axis, with 2.5” HDD

Safety Certificates and Tests

X CE, FCC Class A

X All plastic material, PCB and Battery used are all UL-94V0

certified

X Designed for NEBS 3.0 requirements

Note 1: Certified with ADLINK thermal design. The thermal perfor-

mance is dependent on the chassis cooling design. Forced

air-cooling with 50 CFM is required. Temperature limit of op-

tional mass storage devices can impact the thermal specifi-

cation.

Note 2: Operational vibration is limited by the 2.5 inches HDD. When

application requires higher definition for anti-vibration, we

recommend using Flash disk or CompactFlash.

Power Requirements

Note: Power consumption measured under Windows 2000 SP4,

executing KPOWER and Burn-In-Test.

Configuration +5V +3.3V +12V -12V Total

Single Pentium® M 1.6GHz 512MB RAM,

40GB HDD

10.1A 2.28A 0.25A 20mA 61W

Table 1-1: Power Ratings