User manual

BIOS Setup • 51
Suspend Type:
Select the Suspend Type.
The choices: PWRON Suspend, Stop Grant.
Suspend Mode:
When “Enabled” and after the set time of system inactivity. All devices except the
CPU will be shut off.
The choices: Enabled, Disabled.
HDD Power Down:
When “Enabled” and after the set time of system inactivity, the hard disk drive will be
powered down while all other devices remain active.
The choices: Enabled, Disabled.
CPU THER-Throttling:
Select the CPU THRM-Throttling rate.
The choices: 12.5%, 25.0%, 37.5%, 50.0%, 62.5%, 75.0% and 87.5%.
Wake-Up by PCI Card:
An input signal from PME on the PCI card awakens the system from a soft off state.
The choices: Enabled, Disabled.
Resume by Alarm:
When “Enabled”, your can set the date and time at which the RTC (real-time clock)
alarm awakens the system from Suspend mode.
The choices: Enabled, Disabled.
PM Events:
PM events are I/O events whose occurrence can prevent the system from entering a
power saving mode or can awaken the system from such a mode. In effect, the
system remains alert for anything, which occurs to a device, which is configured as
Enabled, even when the system is in a power down mode.
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
FDD, COM, LPT Port
PCI PIRQ [A-D] #