Specifications

Chapter 3 Hardware
34 Reference Manual LittleBoard 735
TV-Out Interface
Table 3-16 describes the pin signals of the TV-Out interface, which uses 6 pins, 2 rows, odd/even sequence
(1, 2) with 0.100" (2.54mm) pitch.
Note: The shaded areas denote power or ground.
Power Interfaces
Power-In Interface
The LittleBoard 735 uses five separate voltages on the board, but only one of the voltages is provided
externally (+5 volts) through the external header (J19), which uses a 7-pin vertical header with 0.156"
(3.96mm) pitch. Holes for a right angle mounting header are also available at J19. All the onboard voltages
are derived from the externally supplied +5 volts DC +/- 5%. The onboard voltages include the CPU core
voltages as well as the other voltages used on the board.
Table 3-17 lists the pin signals for the J19 power supply input header, which uses 7 pins, single row with
0.156" (3.96mm) pitch.
Table 3-16. TV-Out Pin Signals (J36)
Pin # Signal Description
1 TVDAC A
TVDAC Channel A Output:
TVDAC_A supports the following:
Composite: CVBS signal
Component: Chrominance (Pb) analog signal
2
TV_GND
Ground
3 TVDAC B
TVDAC Channel B Output:
TVDAC_B supports the following:
S-Video: Luminance analog signal
Component: Luminance (Y) analog signal
4
TV_GND
Ground
5 TVDAC C
TVDAC Channel C Output:
TVDAC_C supports the following:
S-Video: Chrominance analog signal
Component: Chrominance (Pr) analog signal
6
TV_GND Ground
Table 3-17. Power Supply Input Pin Signals (J19)
Pin # Signal Description
1
+5V +5.0 Volts – This +5.0 volts DC +/- 5% is the only voltage required for operation.
2
GND Ground
3
GND Ground
4
+12V +12 Volts – This +12 volts is for the PC/104, PC/104-Plus, and LVDS power only.
5
+3.3V +3.3 Volts – This +3.3 volts is for PC/104-Plus Bus power only (optional).
6
GND Ground
7
+5V +5.0 Volts – This +5.0 volts DC +/- 5% is the only voltage required for operation.