Specifications

Chapter 2 Product Overview
10 Reference Manual LittleBoard 735
Figure 2-4. Component Locations (Back view)
Headers and Connectors
Table 2-2 describes the headers and connectors shown in Figure 2-6 on page 13. All I/O headers use 0.100"
(2.54mm) pitch unless otherwise indicated.
Table 2-2. Header and Connector Descriptions
Jack # Name Description
BAT1 Battery Socket Battery socket for 3 volt Lithium battery
J1A,B,
C,D
PC/104 bus 104-pin standard connector for PC/104
J2A,B,
C,D
PC/104-Plus 120-pin, 0.079" (2mm), standard connector for PCI bus
J3 Video (CRT) 12-pin, 0.079" (2mm), header for output to a CRT type monitor
J6 IDE 40-pin standard header for the primary IDE interface
U15
LB735_Back_a
J37
J38