User's Manual

4
Notices
Product Notes
For user safety, please read and follow all instructions, WARNINGS, CAUTIONS, and NOTES marked
in this manual and on the associated equipment before handling/operating the equipment. To
avoid damaging the product due to improper operation, please read the manual thoroughly before
use.
IMX-3000 working temperature:
For 1D and 2D model, the operating temperature range (discharging) is -10°C
to 50°C.
For CCD model, the operating temperature range (discharging) is -10°C to
50°C.
All model of storage temperature range is -20°C to 60°C.
All model of charging temperature range is 0°C to 40°C.
The use of any batteries or accessories not originally sold or manufactured by
ADLINK may cause damage to the product.
The charging cradle only supports charging of two batteries simultaneously.
Attempting to charge three or more batteries at the same time may damage
the cradle or result in other safety risks.
Only connect one device to the DC adapter when charging the batteries as
this may damage the cradle or result in other safety risks.
Do not power on the IMX-3000 if it is forbidden to use wireless equipment or
if using such equipment will cause noise, interference or other dangers.
Wireless devices may suffer decreased performance due to electromagnetic
interference.
Power off the IMX-3000 when refueling. Do not use the IMX-3000 in gas
stations or when near flammables.
Power off the IMX-3000 in or nearby areas where blasting occurs and abide
by related safety rules. Do not use the IMX-3000 in places with blasting
operation.
Only authorized maintenance staff can repair the IMX-3000.
Before trying to connect the IMX-3000 to other devices, read the user manual
for proper instructions. Do not connect the IMX-3000 to any incompatible
products.

Do not stare into the scanner beam to avoid injury to your eyes.