User's Manual
►
Do
not
use
an
AC
adapter
other
than
one
approved
for
your device.
Use
of
another
type
of
AC
adapter
may
result
in malfunction
and/or
danger.
Do
not
use
the
AC
adapter
in
a
high
moisture
environ-
ment.
Never
touch
the
AC
adapter
when
your
hands
or
feet
are
wet.
Allow
adequate
ventilation
around
the
AC
adapter
when using
it
to
operate
the
device
or
charge
the
battery.
Do not
cover
the
AC
adapter
with
paper
or
other
objects
that will
reduce
cooling.
Do
not
use
the
AC
adapter
while
it
is inside
a
carrying
case.
Connect
the
AC
adapter
to
a
proper
power
source.
The
voltage
and
grounding
requirements
are
found
on
the
product
case
and/or
packaging.
Do
not
use
the
AC
adapter
if
the
cord
becomes
dam-
aged
.
Do
not
attempt
to
service
the
adapter.
There
are
no
user
serviceable
parts
inside.
Replace
the
unit
if
it
is
damaged
or
exposed
to
excess
moisture.
When charging the equipment should be installed near
an easily accessible outlet.
To fully disengage the power to the unit, please
disconnect the power cord from the AC inlet.
►
Accessory equipment connected to the analog and digital
interfaces must be in compliance with the respective
nationally harmonized IEC standards (i.e. IEC 60601-1
for medical equipment.) Furthermore all configurations
shall comply with the system standard in IEC 60601-1.
Anyone who connects additional equipment to the signal
input part or signal output part is configuring a medical
system, and is therefore, responsible that the system
complies with the requirements of the system standard
IEC 60601-1. The unit is for exclusive interconnection
with IEC 60601-1 certified equipment in the patient
environment and IEC 60XXX certified equipment
out-side of the patient environment.
40 Importan
t Safety Instructions