User's Manual
NO
TE:
2
Getting
Started
2.1 Charging the Battery
Be
sure
to
fully
charge
the
battery
before
using
your
device
for
the
first
time.
1.
Locate
the
DC
input
socket
on
the
left
side
of
the
tablet
and
open
the
cover.
2.
Insert
the
DC
jack
end
of
the
AC
adapter
into
the
socket
and
the
AC
plug
into
the
wall
socket.
3.
The
power
status
LED
glows
Orange when
charging.
If charging
for
the
first
time,
do
not
disconnect
your
device from
AC
power
until
the
battery
is
fully
charged,
indi- cated
by
the
power
status
LED
glowing
green.
This
may take
up
to
4
hours.
4.
Close
the
cover
when
charging
is
completed.
A blinking power status LED indicates an abnormal charging
condition. Check that the AC adapter is properly inserted into
the DC input socket and that the device is not charging in high
NO
TE:
temperature conditions, resulting in an overheated battery.