User`s manual

16 • Base Unit
8 -- --
9 -- --
 2.2.6 Integrated PS/2 KBD/MS connector
GEME has a proprietary interface for PS/2 keyboard and mouse connections. A
6-pin mini-DIN connector is located on the rear panel of GEME. A proprietary
ADLINK Y-cable is used to convert the 6-pin mini-DIN connector to two 6-pin
mini-DIN connectors for the PS/2 keyboard and PS/2 mouse connections. The
power provided to the keyboard and mouse is protected by a polyswitch rated at
1.1A.
PIN SIGNAL FUNCTION
1 KBDAT Keyboard Data
2 MSDAT Mouse Data
3 GND Ground
4 KBMS5V Power
5 KBCLK Keyboard Clock
6 MSCLK Mouse Clock
 2.2.7 IEEE1394 Connector
GEME comes with two IEEE 1394 interfaces, which are fully Plug & Play compliant
and hot swappable. GEME’s IEEE 1394 interface fully supports the IEEE
1394-1995 standard for high-performance serial bus and the IEEE 1394a-2000
supplement.
Full IEEE 1394a-2000 support includes: connection debounce,
arbitrated short reset, multi speed concatenation, arbitration acceleration, fly-by
concatenation, and port disable/suspend/resume. GEME has two IEEE
1394a-2000 fully compliant cable ports with transfer rates of 100/200/400 megabits
per second (Mbits/s).
PIN SIGNAL
1
+12V
2
GND
3
TPB0-
4
TPB0+
5
TPA0-
6
TPA0+