User`s manual

Introduction • 7
Random Vibration
Operating: 5-100Hz, 0.00142 g2/Hz; 100-500Hz, -6dB/Octave,
0.5Grms, 3axes, 30 minutes/axis
Non-operating: 5-100Hz , 0.02g2/Hz ; 100-500Hz , -6dB/Octave,
1.88Grms, 3 axes,1hr/axis
(IEC 68-2-64)
Warning! Always disconnect the power cord from your chassis whenever you
are working on it. Do not connect the power cord while the power switch is
on. A sudden rush of power can damage sensitive electronic components.
Only authorized and experienced electronics personnel should open the
chassis.
Caution! Always ground yourself to remove any static electric charge before
touching GEME. Modern electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap at all times. Place all
electronic components on a static-dissipative surface or in a
static-shielded bag.