User`s manual

32 Installation
2.14 CN4 pin assignments: Simultaneous Start/Stop
(PCI-8164 only)
CN4 is for simultaneous start/stop signals for multiple axes or mul-
tiple cards.
Note: +5V and GND pins are provided by the PCI Bus power.
No. Name Function (Axis)
1 DGND Bus power ground
2 STP Simultaneous stop signal input/output
3 STA Simultaneous start signal input/output
4 STP Simultaneous stop signal input/output
5 STA Simultaneous start signal input/output
6 VCC Bus power output, +5V