User`s manual

250 Function Library
@ Argument
AxisNo: Designated axis number
conti_flag: Flag for continuous motion
X conti_flag = 0, declare continuous motion sequence is fin-
ished
X conti_flag = 1, declare continuous motion sequence is
started
@ Return Value
ERR_NoError
Return value of _8164_check_continuous_buffer():
X Hardware version bit 12=0
Z 0: command register 2 is empty
Z 1: command register 2 is in-use
Return value of _8164_check_continuous_buffer():
X Hardware version bit 12=1
Z 0: all command registers are empty
Z 1: command register is in-use
Z 2: command register 1 is in-use
Z 3: command register 2 is in-use