User`s guide

4 • Introduction
• Trigger Mode:
P Software-trigger.
P Pre-trigger.
P Post-trigger.
P Middle-Trigger.
P Delay Trigger
• Data Transfer:
P Polling.
P EOC interrupt transfer.
P FIFO half-full Interrupt transfer.
P Bus-mastering DMA.
• Data Throughput: 250KHz (maximum)
♦ Digital I/O (DIO)
• Channel: 8 TTL compatible digital inputs and outputs
• Input Voltage:
P Low: VIL=0.8 V max. IIL=0.2mA max.
P High: VIH=2.0V max. IIH=0.02mA max
• Output Voltage:
P Low: VOL=0.5 V max. IOL=8mA max.
P High: VOH=2.7V min; IOH=400µA
♦ General Purpose Timer/ Counter
• Number of channel: One 16-bit Up/Down Timer/Counter
• Clock Input: Internal 24MHz or External CLK input up to 20MHz
♦ General Specifications
• Connector: 100-pin D-type SCSI-II connector
• Operating Temperature: 0° C ~ 60° C
• Storage Temperature: -20° C ~ 80° C
• Humidity: 5 ~ 95%, non-condensing
• Power Consumption: