User`s guide

Introduction • 3
1.3 Features
• PICMG 2.0 CompactPCI Specification R2.1 Compliant
• PICMG 2.1 CompactPCI Hot Swap Specification R1.0 Compliant
• Standard 3U form factor
• Design for Socket-370 Pentium-III/Celeron CPU
• Supports up to FC-PGA Pentium-III CPU at 850MHz or Celeron CPU
at 733MHz
• One 144-pin SO-DIMM socket supports up to 256MB RAM with
optional ECC support
• Build-in housing for 2.5” low profile HDD
• Separable slim type floppy drive module
• Two on-board EIDE 44-pin connector
• Build-in two USB ports, two serial ports, one parallel port
• Separate PS/2 type keyboard and mouse connectors
• Supports 7 bus-master PCI devices on CompactPCI bus peripheral
slots
• On-board high performance AGP 2x VGA/LCD display output by SMI
SM721 controller
• VGA resolution up to 1280x1024
• LCD resolution up to 1024x768 for 24-bit RGB-TFT LCD
• Supports dual-display and simultaneous display for both VGA and
LCD output
• On-board 10/100Mb Ethernet port by Intel 82559 controller
• Supports Intel pre-boot execution environment (PXE) for remote
boot
• One DOC socket supports up to 144MB DiskOnChip
• 3 or 2 slots width configurations are available for customized
applications