User`s guide

42 • Watchdog and Utilities
disconnecting. This duration can potentially be infinite if the board is
just marginally connecting the longest pins.
6. Board logic ground is connected to chassis ground through a bleed
resistor.
7. The board front panel is connected to chassis ground through a
bleed resistor.
8. Board leaves the ESD card guide.
8. The board is not installed.
If it is not necessary to support Hot Swap Capability, user could disable the
function in BIOS setting and release IRQ9 for other resource. Please refer
to cPCI-3700A BIOS manual for operational instruction.