User`s guide

Driver Installation • 35
4.2.4 Driver Installation on Windows NT
Before install the LAN driver on Windows NT, please copy the LAN driver in
the CD to a floppy diskette. You have to put a new disk into drive A, then
type the following batch command under DOS environment to copy the
relative NT drivers.
X:\CHIPDRV\LAN\100PDISK\Makedisk\Makedisk NT
where X is the CD-ROM drive.
Windows NT may ask to installs a LAN driver from its own library of drivers.
We recommend you to manually updated the LAN, which on the ADLINK
CD to guarantee the compatibility. After installing Windows 98, please
update the new drivers by the following procedures.
1. From the Control Panel, double-click the Netwrok icon, a Network
Configuration window pop up, click Yes.
2. In Netwrok Setup Wizard, click Next>, click Select From List…
button.
3. Insert LAN driver floppy diskette into A drive and click Have Disk.
4. In the dialog box of Insert Disk window, type in A:, Click OK.
5. A Select OEM Option window pop up, click OK, then click Next>.
6. Select necessary Network Protocols, click Next>.
7. Select necessary Network Services, click Next>.
8. Click Next> until Window NT Setup dialog box pop up. Type in
D:\i386 in the dialog box, then insert the original Windows NT CD,
click Continue.
9. Then click OK until the setup completed.
10. Restart the computer to reboot.